Ⅹ

PRODUCTS

PRODUCTS

Products
>PRODUCTS>Products

Products

Vision Tec has been manufacturing the highly dependable reliabiltiy Enviromental
Test Equipment which will completely satisfy all the needs of every customer.

  • Constant Temperature & Humidity Chamber

    VT-THC 100 SERIES / VT-THC 200 SERIES

    • Easy to use with touch screens and computerlized control.

  • Temperature & Humidity WALK-IN CHAMBER

    THC-20 / THC-30 / THC-40 / THC-50

    • "PID Auto Control" type allows accurate operation of temperature and humidity.

  • Altitude Temperature and Humidity Chamber

    VT-ATHC 200 / VT-ATHC 300 / VT-ATHC 400 / VT-ATHC 500 / VT-ATHC 600

    • VT-ATHC series are altitude temperature and humidity chambers (Climatic vacuum chambers) for performing temperature and altitude condition testing in one combined test chamber more than one condition can be created simultaneously to satisfy many types of test requirements.
    • Our ATHC series chambers are designed to simulate altitude conditions up to 100,000ft. also offer simultaneous temperature/altitude and humidity testing from site altitude to 35,000ft.
    • VT-ATHC series are manufactured according to the Total Quality procedures, in compliance with the ISO 9001 standard.

  • Thermal Shock Test Chamber

    VT-TSC 100 / VT-TSC 100-1 / VT-TSC 200 / VT-TSC 200-1

    • As the Thermal Shock Test Chamber is a device that moves specimen to high and low temperatures room respectively during in a short time, to check for any abnormalities due to rapid temperature changes.
    • 2 Zone Elevator Type (Specimen Movement Type)
    • 3 Zone Damper Type (Air Circulation Type : High Temp.↔ Normal Temp.↔ Low Temp.)
    • Test the specimen for damage due to rapid temperature change!

  • Salt Water Spray Tester

    VT-ST100 / VT-ST200 / VT-ST300-66 / VT-ST300-86 / VT-ST400-86 / VT-ST500-86

    • Available to uniform spray inside Chamber!

  • Cyclic Corrosion Tester

    VT-CCT-200 / VT-CCT-500 / VT-CCT-1000

    • Easy to use with touch screens and computerlized control.

  • Auto Salt Water Supply Machine

    VT-SSM 100

    • Density difference of salt water(5%) is Zero!

  • Precision Water Bath

    VT-WB 100 / VT-WB 200

    • Compact Desing & Elepant Appearance!

  • Forced Convection Dry Oven

    VT-DO 100

    • The temperature distribution is uniform and the drying time is fast!

  • Forced Convection Dry Oven

    VT-DO 200

    • No Transfer of Internal Heat to Outside Offered with Complete Double Heat Insulation Treatment!

  • Forced Convection Dry Oven

    VT-DO 400

    • Offering Even Temperature Distribution, Perfect and Safe Design!
    • Two chambers can be operated separately at the same time.(Two chamber effects!)

  • Hydrogen Embrittlement Relief Oven

    VT-DO 300

    • Two chambers can be operated separately at the same time.(Two chamber effects!)

  • Continuous Hydrogen Embrittlement Relief Oven

    VT-DO 500

    • Offering Even Temperature Distribution. Saving Every Data to PC Available!
    • Normally in electroplating, the hydrogen generation of the cathode causes hydrogen to penetrate on the materials.
    • In the case of galvanization, a certain amount of time passing after hydrogen penetrates into the inside of the iron.
    • If iron contains hydrogen, it may lose ductility and become vulnerable, so iron may break, shattar, or crack to exist.
    • Hydrogen Embrittlement Relief Oven is equipment that produce as perfect and superior products by removing these hydrogen from materials or components.

  • Spray and Splash Water(Waterproof) Test Chamber

    SSWT Series

    • The spray and splash water test chamber is a equipment that tests whether or not waterproof standards indicated by IPX1 to 9K, such as IEC60529, ISO20653, etc., are met.
    • It is an equipment for evaluating water resistance due to intrusion of water and testing the reliability of samples and products through tests under various conditions that meet waterproof standards.

  • Dust Test Machine

    VT-DTM 1000 / VT-DTM 8000

    • A dust tester is a device that tests the degree of protection from penetration of external dust that interferes with satisfactory operation of various devices or harms safety.
    • It is manufactured in accordance with standards for test for each country and as well as international standard tests such as IEC60529 ans ISO 20653.

  • Cutting Machine

    VT-CM 50 / VT-CM 100 / VT-CM 200 / VT-CM 200-1 / VT-CM 300 / VT-CM 400 / VT-CM 500 / VT-CM 600 / VT-CM 700

    • The specimen cutting machine is a device that can safely and hgih speed cut various test materials such as metal, ceramic, rubber, film, plastic, and composite materials. The specimen cutting machine aims to observe and analyze the microstructure of the specimen and uses a cutting wheel to cut the surface without damage.
    • Our products are excellent products that have proven their safety.

  • Automatic Mounting Presser

    VT-MP 100 / VT-MP 200

    • This tester is used to mold coupons to facilitate hardness and polishing of various material cuts, such as metal materials.

  • Semi-Automatic Polisher

    VT-AP 100-2

    • This tester is used to polishing surfaces of specimen before viewing to moulded specimen surface with a metal microscope.
    • Alternatively, it is used to polish the surface before conducting a hardness test.